设备驱动程序
GigE相机驱动程序
版本 3.8.0.4597
当 The Imaging Source GigE相机与IC Capture或IC Imaging Control等以DirectShow为主的软件运作时，将必须使用此驱动程序。
驱动程序适用于TIS GigE相机
| 平台： |  Windows |
最新 |
| 版本： | 3.8.0.4597 | |
| 发布： | 2月 2022 | |
| 类型： | EXE | |
| 档案大小： | 5 MB | |
| 下载 | ||
要求
- Intel Core i3或相同等级以上,记忆体4GB
- GigE 以太网控制器(1000 Mbit/s)
- 24或32位元显卡
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- 微软DirectX9.0c或以上
变更日志
Added: 'allowed_fccstr%d' registry keys for specifying better fourcc white list, this is a string and can be set to 'RGB32'/'YUY2'/etc.
Added: Transport-Layer properties are now made available
Added: GenICam nodes 'OffsetAutoCenter', 'OffsetX', 'OffsetY' are serialized from/to registry
Added: ipconfig_cmd parameter 'cleanup_registry'
Fixed: 'Unable to update firmware on camera without GenICam document'
Fixed: Curious bug in Tonemapping, when enabled and auto off, then loading a configuration file could lead to a bad tone mapping table
Fixed: Issue with saving/restoring properties from registry
Changed: Optimized image processing of Saturation, Hue, Denoise and Contrast
 |
3.7.1.4512 | 3月 2020 | Windows | EXE | 5.1 MB | |
 |
3.6.0.4481 | 11月 2019 | Windows | EXE | 5.1 MB | |
 |
3.5.0.4411 | 7月 2019 | Windows | EXE | 3.9 MB | |
 |
3.4.0.4348 | 11月 2018 | Windows | EXE | 3.9 MB | |
 |
3.3.0.4237 | 3月 2018 | Windows | EXE | 3.9 MB | |
 |
3.2.3.4089 | 8月 2017 | Windows | EXE | 3.8 MB | |
 |
3.2.0.3047 | 4月 2017 | Windows | EXE | 3.9 MB | |
 |
3.1.0.3012 | 12月 2016 | Windows | EXE | 3.7 MB | |
 |
3.0.2.2522 | 11月 2015 | Windows | EXE | 3.7 MB | |
 |
3.0.1.2484 | 9月 2015 | Windows | EXE | 3.6 MB | |
 |
2.2.0.2290 | 6月 2015 | Windows | EXE | 3.4 MB | |
 |
2.1.0.1866 | 7月 2014 | Windows | EXE | 2.6 MB | |
 |
2.0.0.1670 | 1月 2014 | Windows | EXE | 2.5 MB |