設備驅動程式
GigE相機驅動程式
版本 3.8.0.4597
當 The Imaging Source GigE相機與IC Capture或IC Imaging Control等以DirectShow為主的軟體運作時，將必須使用此驅動程式。
驅動程式適用於TIS GigE相機
| 平台： |  Windows |
最新 |
| 版本： | 3.8.0.4597 | |
| 發佈： | 2月 2022 | |
| 類型： | EXE | |
| 檔案大小： | 5 MB | |
| 下載 | ||
要求
- Intel Core i3或相同等級以上,記憶體4GB
- GigE 乙太網路控制器(1000 Mbit/s)
- 24或32位元顯示卡
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- 微軟DirectX9.0c或以上
變更日誌
Added: 'allowed_fccstr%d' registry keys for specifying better fourcc white list, this is a string and can be set to 'RGB32'/'YUY2'/etc.
Added: Transport-Layer properties are now made available
Added: GenICam nodes 'OffsetAutoCenter', 'OffsetX', 'OffsetY' are serialized from/to registry
Fixed: an issue with restoring properties from registry
Fixed: 'Unable to update firmware on camera without GenICam document'
Fixed: Curious bug in Tonemapping, when enabled and auto off, then loading a configuration file could lead to a bad tone mapping table
Fixed: Issue with saving/restoring properties from registry
Changed: Optimized image process of Saturation, Hue, Denoise and Contrast
 |
3.7.1.4512 | 3月 2020 | EXE | 5.1 MB | |
 |
3.6.0.4481 | 11月 2019 | EXE | 5.1 MB | |
 |
3.5.0.4411 | 7月 2019 | EXE | 3.9 MB | |
 |
3.4.0.4348 | 11月 2018 | EXE | 3.9 MB | |
 |
3.3.0.4237 | 3月 2018 | EXE | 3.9 MB | |
 |
3.2.3.4089 | 8月 2017 | EXE | 3.8 MB | |
 |
3.2.0.3047 | 4月 2017 | EXE | 3.9 MB | |
 |
3.1.0.3012 | 12月 2016 | EXE | 3.7 MB | |
 |
3.0.2.2522 | 11月 2015 | EXE | 3.7 MB | |
 |
3.0.1.2484 | 9月 2015 | EXE | 3.6 MB | |
 |
2.2.0.2290 | 6月 2015 | EXE | 3.4 MB | |
 |
2.1.0.1866 | 7月 2014 | EXE | 2.6 MB | |
 |
2.0.0.1670 | 1月 2014 | EXE | 2.5 MB |