DMM 37CX296-ML
FPD-Link III monochrome board camera
- 1/2.9 inch Sony CMOS Pregius sensor (IMX296)
- 1,440×1,080 (1.6 MP), up to 60 fps
- Global shutter
- Manufactured by The Imaging Source
- Linux software included
⋯
⋯ ⋯
| General behavior | |
| Dynamic range | 12 bit |
| Resolution | 1,440×1,080 (1.6 MP) |
| Frame rate | 60 fps |
| Video output format | RAW10, RAW12 |
| Interface (optical) | |
| IR cut filter | |
| Sensor type | CMOS Pregius |
| Sensor specification | IMX296 |
| Shutter | global |
| Format | 1/2.9 inch |
| Pixel size | H: 3.45 µm, V: 3.45 µm |
| Lens mount | M12x0.5 |
| Interface (electrical) | |
| Interface | FPD-Link III |
| Supply voltage | tba VDC to tba VDC |
| Current consumption | approx tba mA @ tba VDC |
| Auto iris control | |
| Trigger | |
| I/Os | |
| Interface (mechanical) | |
| Dimensions | H: 30 mm, W: 30 mm, L: 27.5 mm |
| Mass | 7 g |
| Shutter | 15 µs to 1/60 s |
| Environmental | |
| Temperature (operating) | -5 °C to 45 °C |
| Temperature (storage) | -20 °C to 60 °C |
| Humidity (operating) | 20 % to 80 % (non-condensing) |
| Humidity (storage) | 20 % to 95 % (non-condensing) |
| Subject to change. | |
| Fact Sheets | |||
 |
Embedded Development Kits & MIPI® CSI-2 / FPD-Link® III Camera Modules | 1.2 | September 4, 2020 |
| Technical Reference Manuals | |||
  |
DMM 37CX296-ML Technical Reference Manual | 1.0 | April 14, 2021 |
| Whitepapers about Embedded Vision | |||
 |
MIPI Deserializer Design Recommendations | 1.0 | February 22, 2021 |
 |
MIPI Sensor Board Connector | 1.0 | February 22, 2021 |
 |
MSER-FPD 1.00 | 1.0 | February 22, 2021 |
| Subject to change. | |||
| Device Drivers | |||
 |
MIPI Sensor Drivers for NVIDIA® JetPack Version 4.5 | 1.2.3-3 | March 17, 2021 |
 |
MIPI Sensor Drivers for NVIDIA® JetPack Version 4.4 | 1.2.3-1 | December 17, 2020 |
 |
MIPI Sensor Drivers for NVIDIA® JetPack Version 4.4.1 | 1.2.3-1 | December 17, 2020 |
| Disk Images | |||
 |
Demo Image for NVIDIA® Jetson Nano™ Development Kits | 1.0.2 | December 17, 2020 |
| Subject to change. | |||
About The Imaging Source
Established in 1990, The Imaging Source is one of the leading manufacturers of industrial cameras, video converters and embedded vision components for factory automation, quality assurance, medicine, science, security and a variety of other markets.
Our comprehensive range of cameras with USB 3.1, USB 3.0, USB 2.0, GigE, MIPI interfaces and other innovative machine vision products are renowned for their high quality and ability to meet the performance requirements of demanding applications.
