DMM 36CX297-ML
Board camera with FPD-Link III
- 1/2.9 inch Sony CMOS Pregius sensor (IMX297)
- 720×540 (0.4 MP), up to 120 fps
- Global shutter
- Trigger and I/O inputs
- Manufactured by The Imaging Source
- Linux software included
⋯
⋯ ⋯
| General behavior | |
| Dynamic range | 10 bit |
| Resolution | 720×540 (0.4 MP) |
| Frame rate | 120 fps |
| Video output format | 10-Bit Monochrome |
| Interface (optical) | |
| IR cut filter | |
| Sensor type | CMOS Pregius |
| Sensor specification | IMX297LLR |
| Shutter | global |
| Format | 1/2.9 inch |
| Pixel size | H: 6.9 µm, V: 6.9 µm |
| Lens mount | M12x0.5 |
| Interface (electrical) | |
| Interface | FPD-Link III |
| Supply voltage | 27 VDC to 10 VDC |
| Current consumption | approx 110 mA @ 18 VDC |
| Auto iris control | |
| Trigger | |
| I/Os | |
| Interface (mechanical) | |
| Dimensions | H: 30 mm, W: 30 mm, L: 27.5 mm |
| Mass | 12 g |
| Shutter | 1 µs to 1 s |
| Environmental | |
| Temperature (operating) | -5 °C to 45 °C |
| Temperature (storage) | -20 °C to 60 °C |
| Humidity (operating) | 20 % to 80 % (non-condensing) |
| Humidity (storage) | 20 % to 95 % (non-condensing) |
| Subject to change. | |
| Fact Sheets | |||
 |
Embedded Development Kits & MIPI® CSI-2 / FPD-Link® III Camera Modules | 1.2 | September 4, 2020 |
| Technical Reference Manuals | |||
 |
DMM 36CX297-ML Technical Reference Manual | 1.1 | December 17, 2021 |
| Whitepapers about Embedded Vision | |||
 |
MIPI Deserializer Design Recommendations | 1.0 | February 22, 2021 |
 |
MIPI Sensor Board Connector | 1.0 | February 22, 2021 |
 |
MSER-FPD 1.00 | 1.0 | February 22, 2021 |
| Subject to change. | |||
| Device Drivers | |||
 |
MIPI Sensor Drivers for NVIDIA® JetPack Version 4.4 | 2.2.11-1 | December 3, 2021 |
 |
MIPI Sensor Drivers for NVIDIA® JetPack Version 4.4.1 | 2.2.11-1 | December 3, 2021 |
 |
MIPI Sensor Drivers for NVIDIA® JetPack Version 4.5 and 4.5.1 | 2.2.11-1 | December 3, 2021 |
| Disk Images | |||
 |
Demo Image for NVIDIA® Jetson Nano™ Development Kits | 1.0.3 | May 26, 2021 |
| Subject to change. | |||
About The Imaging Source
Established in 1990, The Imaging Source is one of the leading manufacturers of industrial cameras, video converters and embedded vision components for factory automation, quality assurance, medicine, science, security and a variety of other markets.
Our comprehensive range of cameras with USB 3.1, USB 3.0, USB 2.0, GigE, MIPI interfaces and other innovative machine vision products are renowned for their high quality and ability to meet the performance requirements of demanding applications.
