MIPI Sensor Drivers for NVIDIA® JetPack Version 4.4.1

Changelog

1. Supports streaming via tiscamera/tcamtegrasrc (from tis-tegra-filters 1.1.0)
2. Add documentation
3. Add support for IMX390 sensor
4. Add device tree files 6fpdlink configurations on AGX Xavier
5. Introduce user controls for advanced camera configuration
6. Add Device Model Name, Device Vendor Name, Device Serial Number controls to control device
7. Add Trigger Mode, Trigger Source, Trigger In Polarity controls to control device for cameras that support trigger
8. Add Trigger Software control to control device for cameras that support it
9. Add Strobe control to control device for cameras that support strobe
10. Add GPOut Function, GPOut Mode to control device for cameras with a GPOut connector
11. Add Offset X, Offset Y, Offset Auto Center controls to control device
12. Add Black Level control to control device for cameras that support it
13. Add mode_raw_fourcc control, providing information about the actual fourcc of the raw data for the available sensor modes
14. Add device_valid control, indicating whether a device is present
15. Add support for monochrome cameras by selecting the appropriate mode_raw_fourcc
16. Provide a number of default cropped resolutions for each sensor type
17. Read camera EEPROM to provide a hardware-dependent feature set
18. Print driver versions into kernel log
19. Sort sensor modes by pixel format and size
20. Add support for reconnection of FPD-Link camera
21. Improve error handling in case a camera is not working correctly
22. IMX297: Increase minimum FPS to 5