Device Driver for GigE Cameras
- 3.8.0.4597
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
3.8.0.4597
Released
February 4, 2022
Type
EXE
Filesize
5 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Added: 'allowed_fccstr%d' registry keys for specifying better fourcc white list, this is a string and can be set to 'RGB32'/'YUY2'/etc.
- Added: Transport-Layer properties are now made available
- Added: GenICam nodes 'OffsetAutoCenter', 'OffsetX', 'OffsetY' are serialized from/to registry
- Added: ipconfig_cmd parameter 'cleanup_registry'
- Fixed: 'Unable to update firmware on camera without GenICam document'
- Fixed: Curious bug in Tonemapping, when enabled and auto off, then loading a configuration file could lead to a bad tone mapping table
- Fixed: Issue with saving/restoring properties from registry
- Changed: Optimized image processing of Saturation, Hue, Denoise and Contrast
Download - 3.7.1.4512
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
3.7.1.4512
Released
March 11, 2020
Type
EXE
Filesize
5.1 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Fixed: Polarization format PPB1 for certain resolutions (e.g. 320x240) crashing on some specific CPUs
- Fixed: Updated FilterPackage to version with fix for Y800 -> RGB8 being flipped
- Fixed: Some registry settings (allowed_*) not working
- Fixed: DShow applications can only select the largest dimensions for a format
- Added support for IAMStreamConfig::SetFormat when the filter graph is connected already.
Download - 3.6.0.4481
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
3.6.0.4481
Released
November 18, 2019
Type
EXE
Filesize
5.1 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Added: Support for The Imaging Source polarization cameras.
- Updated: FilterPackage with better Y800 to RGB transformation performance
Download - 3.5.0.4411
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
3.5.0.4411
Released
July 24, 2019
Type
EXE
Filesize
3.9 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Fixed: Strobe Polarity could not be enabled for some camera models.
- Fixed: Exposure Auto Max value missing for some camera models.
- Fixed: DirectShow VideoProcAmp_Saturation value and range.
Download - 3.4.0.4348
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
3.4.0.4348
Released
November 29, 2018
Type
EXE
Filesize
3.9 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Tone mapping for RGB32/Y800 streams
- Several optimizations to packet-resend.
- Fixed calculation for subnet-mask in IPConfig
Download - 3.3.0.4237
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
3.3.0.4237
Released
March 27, 2018
Type
EXE
Filesize
3.9 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Fixed issue with ffmpeg tools usage.
- Fixed YUY2/Y411 contrast not working
Download - 3.2.3.4089
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
3.2.3.4089
Released
August 3, 2017
Type
EXE
Filesize
3.8 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Disabled Windows XP support.
- Fixed problems with older camera models, e.g. DFK 21AG04.
Download - 3.2.0.3047
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
3.2.0.3047
Released
April 28, 2017
Type
EXE
Filesize
3.9 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Disabled kernel mode driver for Windows 10.
- Trigger delay can now be set.
- Fixed an OpenCV compatibility issue.
- Fixed a potential error in packet resend.
- Enabled DMK J003 pattern fix.
Download - 3.1.0.3012
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
3.1.0.3012
Released
December 7, 2016
Type
EXE
Filesize
3.7 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Updated Tonemapping with "Auto" parameters and "Tonemapping-Global-Brightness".
- Various changes made to increase reliability of GenICam layer.
Download - 3.0.2.2522
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
3.0.2.2522
Released
November 5, 2015
Type
EXE
Filesize
3.7 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Fixed bugs that can occur in Windows XP.
Download - 3.0.1.2484
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
3.0.1.2484
Released
September 6, 2015
Type
EXE
Filesize
3.6 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Added support for 33G camera series.
Download - 2.2.0.2290
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
2.2.0.2290
Released
June 4, 2015
Type
EXE
Filesize
3.4 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- Improved support for cameras with IMX236 sensors.
- Driver service is now available as 64bit version which improves performance.
Download - 2.1.0.1866
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
2.1.0.1866
Released
July 16, 2014
Type
EXE
Filesize
2.6 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Changelog
- New camera properties: Gamma, contrast, sharpness, hue, saturation and brightness.
Download - 2.0.0.1670
Device Driver for all GigE cameras manufactured by The Imaging Source.
Version
2.0.0.1670
Released
January 22, 2014
Type
EXE
Filesize
2.5 MB
Requirements
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Download
This driver is necessary when using The Imaging Source GigE cameras with DirectShow-based software such as IC Capture or IC Imaging Control.
If the application software already supports GigE (e.g. National Instruments LabVIEW or MVTec HALCON), this driver is not necessary.
An older driver (e.g. version 3.0.1 or lower) is required for Windows XP.
About The Imaging Source
Established in 1988, The Imaging Source is one of the leading manufacturers of industrial cameras, video converters and embedded vision components for factory automation, quality assurance, medicine, science, security and a variety of other markets.
Our comprehensive range of cameras with USB 3.1, USB 3.0, USB 2.0, GigE, MIPI interfaces and other innovative machine vision products are renowned for their high quality and ability to meet the performance requirements of demanding applications.
We Need Your Consent (Art. 13 GDPR)
We use necessary cookies and third-party content (e.g. script libraries) to ensure the function of our website.
We only use other cookies, e.g. to measure how often our site is visited and how it is used, if you expressly give us your consent.
We also use tracking technologies for marketing purposes and from third-party providers that may use cookies, fingerprints, tracking pixels and IP addresses across devices.
By clicking on I agree, you agree to the above described processes and accept our privacy policy. You can withdraw your consent at any time, by clicking on I disagree.
To reopen this dialog, click on GDPR consent in the footer.