Using Trigger and Digital I/Os - Part 3

Published on June 4, 2008

Please Note: This blog post is part of a series of five posts altogether.
The posts include: Part 1, Part 2, Part 3, Part 4 and Part 5.

Digital I/Os - Pin Header

As already mentioned in the introduction, there are two ways to access the camera's digital I/Os: using an internal pin header or an external Hirose connector. To access the internal pin header please open the cameras backplane. You will find connectors as illustrated by the drawings below. Please assemble a cable that fits your application.

The pin header consists of 2x8 pins with a pitch of 2.00 x 2.00 mm. The cable's pinout is in the table below.

Important: Please note that only FireWire cameras provide a power supply at Pin 3 and 4. In the case of USB cameras these pins are open.

To be continued...

Share this post with your friends and coworkers:

Post published by TIS Marketing on June 4, 2008.

About The Imaging Source

Established in 1990, The Imaging Source is one of the leading manufacturers of industrial cameras, video converters and embedded vision components for factory automation, quality assurance, medicine, science, security and a variety of other markets.

Our comprehensive range of cameras with USB 3.1, USB 3.0, USB 2.0, GigE, MIPI interfaces and other innovative machine vision products are renowned for their high quality and ability to meet the performance requirements of demanding applications.

ISO 9001:2015 certified MVTEC | Edge AI + Vision Alliance | EMVA

Contact us