Lenses Selection and Setup - Part 3

Published on June 16, 2008

Please Note: This blog post is part of a series of five posts altogether.
The posts include: Part 1, Part 2, Part 3, Part 4 and Part 5.

Step 3: How to deal with very small working distances

Especially in the case of small objects, the working distance may be smaller than the selected lenses minimal working distance (MOD). In this case, we decrease the minimal working distance by putting extension rings between the lens and the camera. We will see details at Step 4 (Setup). The following example depicts the selection of an extension ring:

Inspection of a birthmark:

  • Object width = 5 mm
  • Working distance = 30 mm
  • CCD format = 1/4″ (CCD width = 3.2 mm)

In this case the focal length is 14.7 mm and thus we select the H1214-M(KP). Its minimal object distance (MOD) is 0.25 m and thus exceeds considerably the required working distance of 3 cm. The table below indicates the use of a 5 mm extension ring.

Share this post with your friends and coworkers:

Post published by TIS Marketing on June 16, 2008.

About The Imaging Source

Established in 1990, The Imaging Source is one of the leading manufacturers of industrial cameras, frame grabbers and video converters for production automation, quality assurance, logistics, medicine, science and security.

Our comprehensive range of cameras with USB 3.1, USB 3.0, USB 2.0, GigE interfaces and other innovative machine vision products are renowned for their high quality and ability to meet the performance requirements of demanding applications.

Automated Imaging Association ISO 9001:2015 certified

Contact us