Device Driver for GigE Cameras
This driver is necessary when using The Imaging Source GigE cameras with DirectShow-based software such as IC Capture or…
Device Driver for all GigE cameras manufactured by The Imaging Source.
- Intel Core i3 or similar, 4 GB RAM
- GigE (1000 Mbit/s) network controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit), Windows 11
- DirectX 9.0c or higher
Added: 'allowed_fccstr%d' registry keys for specifying better fourcc white list, this is a string and can be set to 'RGB32'/'YUY2'/etc.
Added: Transport-Layer properties are now made available
Added: GenICam nodes 'OffsetAutoCenter', 'OffsetX', 'OffsetY' are serialized from/to registry
Added: ipconfig_cmd parameter 'cleanup_registry'
Fixed: 'Unable to update firmware on camera without GenICam document'
Fixed: Curious bug in Tonemapping, when enabled and auto off, then loading a configuration file could lead to a bad tone mapping table
Fixed: Issue with saving/restoring properties from registry
Changed: Optimized image processing of Saturation, Hue, Denoise and Contrast
|126.96.36.19912||Mar 2020||EXE||5.1 MB|
|188.8.131.5281||Nov 2019||EXE||5.1 MB|
|184.108.40.20611||Jul 2019||EXE||3.9 MB|
|220.127.116.1148||Nov 2018||EXE||3.9 MB|
|18.104.22.16837||Mar 2018||EXE||3.9 MB|
|22.214.171.12489||Aug 2017||EXE||3.8 MB|
|126.96.36.19947||Apr 2017||EXE||3.9 MB|
|188.8.131.5212||Dec 2016||EXE||3.7 MB|
|184.108.40.2062||Nov 2015||EXE||3.7 MB|
|220.127.116.114||Sep 2015||EXE||3.6 MB|
|18.104.22.1680||Jun 2015||EXE||3.4 MB|
|22.214.171.1246||Jul 2014||EXE||2.6 MB|
|126.96.36.1990||Jan 2014||EXE||2.5 MB|